We have removed our head stay and furler from SM72, and would like to replace the rivets with the stainless screws and backing plates that Amel now uses. Does anyone know if Amel still sells the kit w

Hi all, I am the excited new owner the Amel Super Maramu #121. Olivier surveyed my boat in La Rochelle earlier this month. I'm the "young man" he refers to at the end of the Zoom meeting last week :)

Hi Folks, Pen Azen is 20 years old and has about 65,000 miles under her keel. On the faux teak deck she has a number of hairline cracks, hard to see unless in sunlight and about 1-2 cm long. They are

I agree, magnificent decks!! Steve, do you mind sharing what paint you picked (either the brand or color #) for both the brown and the white? Thks JB

Hello, We are rebuilding the whole plumbing system. 1. For the washing machine, where do you send the grey water? In the bilge and then you pump it out? There is an used thruhull above the water line

Hi Folks, Pen Azen is 20 years old and has about 65,000 miles under her keel. On the faux teak deck she has a number of hairline cracks, hard to see unless in sunlight and about 1-2 cm long. They are

Has anyone in the group converted the Dodger windows to Glass? Ideally I would still like the functionality to open the port side. Thanks, Dan Feierabend SM #86

We're currently in a marina, on shore power with the battery charger on.. and the starter battery (2 year old Victron 110ah) has suddenly died - showing less than 2v! and reducing 0.01v every 5 minute

Ciao y'all.... Davi here on SM#56, Wake. So I've been trying to have my Perkins Prima M80T rebuilt for some months now with disappointing results. Constant gray/white smoke and spitting oil or diesel

The folks at SOFOMARIN in France (supplier to Amel for PVC manifolds for the 55, 50, & 60) and I have been working on a PVC Secondary Saltwater Manifold in PVC for late model SM's. The original Saltwa

Hello, I got my SM without spare halyard on the main mast. I like to ask where on the main mast is the spare halyard block attached so it is not interfering with other halyards and hardware. Regards J

I'm looking for the inner diameter of the fuel line which exits the main tank. It's not marked on the hose. This hose runs about a foot out of the tank, then into a copper pipe along the starboard sid

All, You can view any of our previous ZOOM meetings. Here is a link to our YouTube channel which has all of our video meetings: https://www.youtube.com/channel/UC-ykjC22ewCUSqR34deZe0A Here is a link

If you missed the meeting, try this link to play a recording of the meeting. https://youtu.be/c26xpu51mMY Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galvesto

Hi have a look a this- I am trying to identify what it is and why it is in place (it is corroded). Ignore the relay wired thing- as it is just zip tied there. I believe it to be a check valve put in p

Reminder: An Amel Survey by Olivier Beaute When: Saturday, 16 January 2021, 20:00 to 21:00, (GMT+00:00) UTC Where:From La Rochelle, France An RSVP is requested. Click here to RSVP Organizer: Bill Rous

Hi, I have a broken shackle on the main outhaul car . The bar across the middle of the shackle is broken. When taking it apart today I noticed that there was a crack on one of the end pieces, close to

Hello all. Does anyone have the rudder dimensions for the Mango Rudder or perhaps a Super Maramu rudder? I am after the length (forward and aft) and the height (top to bottom) of the rudder. I looks a

We are looking to replace our carpet and prefer to have a foam back both for comfort and non-slip. Saw Mark’s post on Shaw Nuwave backed carpet but it appears that is no longer in production. Received

After 20+ years of service, the compass on Talia (SM#209) has developed an air bubble (astonishing service life by today's standards). The compass is a Plastimo Olympic 135. My intention was to remove