Hi All, I'm trying to replace the mizzen deck spreader light bulb (suspect it has burnt out). I've seen that people have replaced this with LED....but that's not my question. When trying to remove the

Hi , Does anyone in the group have a heater installed by the factory in an Amel 54? Fair Winds Eric Kimberlite Amel Super Maramu #376

Tentative ZOOM - Jimmy Cornell - Pacific Voyage Planning When: Saturday, 13 February 2021 20:00 to 21:00 (UTC+00:00) UTC Organizer: Bill Rouse BROUSE@... 4093563221 An RSVP is requested. Click here to

Good afternoon Amel community. I’ve purchased an amel Maramu 46 and slowly learning the basics of it. While sailing yesterday the jib sail halyard snapped and I need to replace it. My problem is this.

I recently bought and installed the Blue Sea 1841 M2 temp sensor. I feel like this data is so important that I removed one of my passive VHF speakers in the cockpit and placed it facing me. Question t

Greetings to all, I was pretty unhappy with the lighting on my electrical panel, then discovered that most of the bulbs were not working. Thanks to previous emails from Arno regarding the repair. Here

https://www.reuters.com/article/us-apple-autos-exclusive/exclusive-apple-targets-car-production-by-2024-and-eyes-next-level-battery-technology-sources-idUSKBN28V2PY -- John Bernard "JB" Duler San Fran

Good day Amel friends, Does anyone have pictures of a Beta 60 placed in an Amel Maramu? I followed the story of Mark & Nicky Barter regarding their placement of a Beta 85 in a super Maramu. It hurts m

Most SM & 54 owners are aware that sooner or later they will need to replace the Secondary Saltwater Manifold which was made by Amel from copper pipe. Here is a view of the original SM Secondary Saltw

Hello Amelians, My 1982/3 Maramu appears to have sprung a leak in the fuel tank. This happened once before but it was just the inspection port plate that needed tightening. The Maramu appears to have

When sailing upwind I generally try to center the boom for best performance which means I have to pull the traveler most of the way to windward after each tack. With the 4:1 tackle supplied as standar

Hello Ameliens, I hope you are all healthy and in good spirits, wherever you are. Inspired by some comments here about better battery condition and performance, I decided to install Victron battery ba

In installing our new mainsail, I noticed that there is some play (a small amount) in the foil connection to the furler. I've read all the posts regarding the process for cutting down the foil and dri

Ciao y'all.... Davi here on SM#56, Wake. So I've been trying to have my Perkins Prima M80T rebuilt for some months now with disappointing results. Constant gray/white smoke and spitting oil or diesel

Hi All, I will not pretend to be an expert on HF/SSB because I am very far from it! On my Amel 54 I have an IC-M801 SSB with SCS PTC II Pactor modem. I seem to be able to transmit just fine as other b

Hi all; We are in the process of selecting a new tender. We are considering the Highfield CL310 or CL340. I would appreciate input on the following issues: 1. Opinions on the Highfield line of tenders

Can Amel 60 or 64 carry a William Minijet tender 2.79m/9ft 2inBEAM 1.54m/5ft 1inDry Weight 210kg/465lbOverall Height 0.83m/2ft 8in (0.71m in Low Profile Setting)Engine 60hp BRP Rotax Ace 900 EngineFu

Hi, can you please stop my enrollment on your amel yacht owners forum....I cannot buy an amel right now and 90% of the mails are totally irrelevant for a non-owner. Thanks Angel & Boudewijn Vanhuysse

Hi Ian and all, Capital idea! I have also thought that a model specific sub section of the site might serve to promote more discourse among owners of similar boats and be more efficient. For instance

Greetings! Our port side navigation light has been unreliable since years. We switched to LED two month ago. It worked fine while in port. It soon failed underway and after arrival in Antigua it still