Hi Brent, thanks for the input. That is a lot of tool. You tackle a lot bigger jobs than I'm likely to do! Years ago I launched my lake boat without the plug, and had to jump overboard with a sock to

ZOOM Meeting with Battle Born LiFePO4 Lithium Batteries When: Saturday, 8 August 2020 20:00 to 21:00 (UTC+00:00) UTC An RSVP is requested. Click here to RSVP Description: If you are interested in Lith

Hello We have flojet 32601 -0092 Quad series pump r4105512a. ( 12v, 1.5 A max, 1.6 gpm 6.1 lpm, 50 psi 3.4 max) installed onboard as circulation pump for fridges/freezer. They are relatively easy to s

When in an area with low or almost no bars on the cell phone (we use for data), I’ll often put the phone up the mizzen mast to improve the line-of-sight to the cell tower. On this occasion, I mistied

anyone have their old bg instruments and depth sounder etc laying around that they have yet to sell. I am intereted.

Hi all, I've seen a few posts where people talk about using a slide hammer. I've never used one, but I run across projects regularly where I think one would be useful. Can anyone guide me in choosing

I inherited an Iridium GO! when I purchased my SM2 last year and am just now beginning to use it. Thanks to PredictWind’s tech support in New Zealand I can get the system up and running with my iPad.

On SM2K 422, the Onan MDKAV uses a Vetus Waterlock LP50. The exhaust line into the muffler is thus 50 mm. The muffler outlet has a 50 to 40 mm reducer which connects to the genset exhaust hose. In buy

I was thinking of changing out my original fresh water pump for a Sureflo Aqua King.My only concern is that the shutoff pressure is 55 PSI, 3.8 Bar.It is an on demand pump and puts out 18 liters per m

So enjoying my first week with my new (to me) 55 (formerly iolani) now named Coder. The fwd shower drain was draining slowly, the fwd sink seems fine. It stopped draining tonight and the shower floor

We have a number of members whose email is not working. I looked at the individual records. It is difficult for me to tell why this is happening and it appears that most of these members applied when

Can anybody recommend an Anchorage or a marina in Jacksonville Florida I have to overnight there Saturday night and pick up someone from the airport Cheers Courtney sv Trippin 54 #101

We bought Sharki 162 last fall and did not get a chance to sail her till now. Trouble is that sails and running rigging (I hope) are stored below deck and I have never seen the boat with the running r

Hello there fellow Amelians We have just loved our vintage Maramu ti here new home up the Tamar river in the UK. Lovely spot on a swinging mooring but the tide rips through at 4 knots at springs So mu

Hey everyone! i recently had my Mizzen sheet cars fail during a sail. The pin pull ring failed and literally one disintegrated and the other split on the same sail trip! Ive attached photos of my ‘Dua

I'm replacing the forward cabin air conditioner and I'm wondering how well the Webasto FCF 9000 fits. By the dimensions it seems like it might be difficult to get to the valves for the chain locker an

From ALETES, SM#240 1999 with Jabsco manual pump: Head backflow and Holding Tanks We have persistently had issues with holding tank backflow to the toilet requiring frequent cleaning or replacement of

Hi all. I have arrived where all us SM oweners will some time and am replacing the hawse pipe from the deck through the port deck locker. The old mild steel on didnt look too bad till I hit it with a

I have the original Eno range and stove on my Amel. The range works fine. The first time I tried to use the oven I initially had problems getting it to light. Finally the burner tube around the top of

We hove-to three times this Spring before crossing the Stream. Each time 35+kts from the N, 8-10 ft seas. She heaves-to like a dream, slipping directly downwind with the upwind slick preventing waves