Hi, Working on the electric circuit today, I found a switch behind the box of the 220v panel. Does anybody know what it is for? regards, Eloi SM2K 426 Red Lion

My propeller was vibrating rather strongly when motor sailing in non-flat waters. Such vibration was only felt during certain parts of the up and down motion with the waves. In Martinique, the boat wa

Hello, To all Amel 54 owners: I am going to change the 2 Bamar electric furlers . They are from 2006 but still working well. If someone is interested for spare parts or to fix a broken furler, please

Hi all, The oil pan drain pipe on our Onan MDKBN spec D generator has developed a tiny leak between the oil pan and the elbow fitting. Looking at the parts catalog, I can only see a plug for that part

I suspect my squealing or squeaky hatch is actually the counter weight system for the hatch. Has everyone serviced that on a 55 or similar boat yet? The hatch squeals a lot when raising and lowering i

Hallo, When i we bought our SM2K, there was an asymmetrical spinnaker (original option with snuffer from Amel) on board but the seller couldn't tell me how to fix it at the bow of the boat. Does anybo

I tried to replace my forward and side acrylic windows and was quoted $1400.00 US for the material and $600.00 to install them I checked St Thomas and the 10mm acrylic price was $280.00 US and $200.00

To all, I have a 1988 Mango and I find that the thru hull which feeds the forward head no longer has a working handle ( it moves but does not allow water in). This thru hull also supplies the anchor w

Hallo, does anybody know what these items are for ? (not the tape measure :-) ) The long one is a double sandow. regards, Eloi SM2K 426 Red Lion

Hi All, a little while ago I asked if anyone had experience of removing the electric motor from under the sheet winches. I think is was Eric that responded while I think Bill R said he had not heard o

A month ago, I received a notice from my insurance company saying that they were leaving the marine insurance business and that I would not have insurance after May. After a number of very expensive a

Dear Amelians, from time to time we get an electrical shock (for free ;-) when using the switches to lower or raise the dinghy AND have contact to the davids or wires. Today I checked the units/ elect

Does anyone have digital files for the the Amel decal on the cabin sides? Bill Reynolds Cloudstreet SM2K 331

Hello Amelians, This is actually an old topic, but I couldn't find any definitive answers. For years we have been rinsing dishes and emptying coffee grounds in the cockpit to avoid fouling the grey wa

CW Bill Rouse <brouse@...> added folder /Amel Logos

Inside Tips - "How to work with a broker to Buy or Sell your Amel" - ZOOM also simulcast and recorded on YouTube When: Saturday, 10 April 2021 20:00 to 21:00 (UTC+00:00) Etc/GMT Where: Internet Worldw

Hi Bill and members of this group,good day to you all and hope all is well and covid-19 free . Here in Italy at the moment we are suffering total lockdown in most of the regions. This is my second tim

Hi Bill and members of this group,good day to you all and hope all is well and covid-19 free . Here in Italy at the moment we are suffering total lockdown in most of the regions. This is my second tim

As most of my sailing instramentation and hardware is now NMEA 2000, the last two sensors I need to address are the transducers (Depth, Temp, Speed). After these I can Retire my Hydra 2000 and all the

Hello, Where is the deck shower installed on your SN or SM? On my SN it’s in the port cockpit locker which is sub optimal... Rgds -- Bernd SN 119 / Cascais, Portugal