Hi I am looking for a good technician in Rhodos. Can someone maybe recommend me a technician in Rhodos that has experience with Amel? Thanks a lot in advance for your feedback. Lior Sharona A54 #18

Hi all SM owners, Our swim ladder is just that, we have the wheels and the deck step end but none of the parts to make it into a usable pasarelle. Does anyone have the specifications for the original

About 7:12 https://www.youtube.com/watch?v=46rg0hqwgu4&t=75s

Hi All I'm just about to replace my forestay and need to 'drop' the Genoa furler. Can someone please offer me advice on how to do it? Regards Rob SY FORESIGHT SM #152

Hello, I am getting used to my new boat. I need some help with model of the anchor washing pump that is not working at all. I made some photos but didinot check at the time how clear the photos are. N

Recently, as we have been using the manual bilge pump quite a lot due to a problem on the AMFA electric pump, I noticed a leak on that pump, and getting worse. Grey water coming from the ceiling of th

I recently serviced both main furling and outhaul gears and motors. I found the aluminium shaft on the furling motor very difficult to remove. It was soaked 48 hours in diesel and then pressed out wit

Could someone please tell me the external diameter of the copper fuel line. It will obviously be the same as the ID of the fuel hoses. I just can't remember it. Many thanks -- Mark & Nicky Barter S/V

I have spent the last couple of days trying to debug the side-power bow thruster on my boat, and the up/down 4 relay system. My motor for up/down had a bad bearing and was blowing a fuse. It appears t

Stefania Dente

If you missed the QSails ZOOM meeting, it is now posted. Use this link: https://youtu.be/9CR3O9uD9SM Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... Address: 720 Winnie, Galve

If you were interested in Battle Born Batteries, here is an independent tear-down: https://www.youtube.com/watch?v=G5E30u-66VI And the same guy tearing down a Chinese Lithium from Ali Express : https:

Jimmy Cornell - Crossing the Atlantic via ZOOM and YouTube When: Saturday, 10 October 2020 20:00 to 21:00 (UTC+00:00) UTC Where: Internet ZOOM Organizer: Bill Rouse brouse@... +18323804970 An RSVP is

Dear Amelians: I beg any insight if you would. This is a 1.5 year old motor and housing from Amel for the main sail foil furling motor. The last one, seal was damaged and the whole unit unsalvageable.

Anyone seen this. The companion way door locks and unlocks normally with the key. If locked with the key then you can unlock using the inside "knob". But, I cannot lock it from inside. The "knob" is l

Deck leak. Hello All, My boat has developed a small deck leak over the chart table. So far it is small and is visible only by looking at the slight bubbling and dampness in the head liner. I suspect t

Hi, does anyone have A spare electrical black box M61037 for sale for the airco Compact 9 EH - Cod. M60018 unit?

We have had a perpetual problem trying different methods of retaining the grate above the burners. We have the stove that came with the deluxe package on our SM2000. The grate does not stay in place .

Hi Amelians, I have ordered sensors for the following people. They should ship to me within 2 weeks from the west coast. I will send them out Priority mail when I receive them. Mark 1 PC Mohammad 3 Ji

Hi Kent, I will be on board Kimberlite until Oct-28 ish. I will then head to somewhere in the Caribbean. Depending on Covid. Fair Winds Eric Amel Super Maramu #376