Hi all, After finally getting my 100 duo back up with new membranes, I tested it out this morning and it seemed to be working fine, and making water, although erratically, which I put down to needing

Hi Ameliens The red led for alternator not charging at the 24 Volt panel is lighting. But the alternator is charging the batteries. This error must also go to the NMEA 2000 Bus because my TZTouch is s

Hi Jim, And thanks for that extra info about the microwave ovens. Indulging in a bit of topic drift here, but the dialogue and extra info is fantastic (eMail subject changed accordingly). We have a st

Getting ready to have professional installed bow thruster. Amel 53 1980 Mango, would an 8 inch or 10 inch be advised. Northern Goose Amel 53 #12

Dear fellows As part of a MERIT rejuvenation plan, almost all of the electronics were upgraded. Electronics removed and available in perfect working order for those who need: Radar FURUNO Furuno AIS F

Optionally, a (single) snubber over the bow roller to the center cleat not only avoids the chance of twisting the (double) lines of a bridle, but also eliminates chafe on the gunnel under the side cle

For some, that may be better than Santa! We are in need of a survey to secure new insurance. We have not had a survey since purchasing the boat 6 years ago and thought why not have the best of the bes

Hi Everyone, I would like to poll the group about SSB use in the real world now. Especially those of you sailing in the Pacific Islands: If you have and SSB (HF) Radio: are you using it? Does it provi

If you anchor out, you should have this or an equivalent. New these sell for $715. We used a cheap, self-made snubber 99% of the time, but when weather was coming, the Mantus bridle came out for our S

We are currently having work done on our Onan MDKAV and the workshop have told me that the exhaust manifold and elbow are both beyond salvage. After spending a few hours yesterday afternoon we have ma

I was helping a fellow Amel owner with a very similar problem. They wanted to replace both the manifold and elbow. For you old time hot rodders, cleaning this up is very similar to porting and polishi

I used a bigger tranny cooler than original . I used the model 90. Worked just fine until I put in a new engine. The new Yanmar has a built in tranny cooler. Please note below the cost in the USA of t

I’ve got a question for those of you with Super Maramus: have any of you noticed if the inside of the bowthruster trunk is coated with gelcoat or any other form of barrier coat? We are still trying to

No one posted this problem but I always found it very annoying when I am having my main sail repaired. The foil bangs around in the mast. To alleviate this noise I finally came up with a good solution

Hi all, we need to change the Burkert valve for the watermaker. See pic. I think that it is not screwed anywhere and can just be pulled out of the metal holder theoretically. This requires disconnecti

Hi all, Would anyone know where I can get a new bilge pump “plate” which is cracked (see picture below)? I know Amel provide a service kit but this does not include this part. Cheers, Paul Paul Dowd &

The Onan Exhaust Fan is not working. What do I need to test? Happy at Great Barrier Island, NZ Fair Winds Arthur Suindqvist SM435 Vista

The first photo is a toolbox that I had built to keep all things organized. When Kimberlite was built, I had Amel add 2 shelves in both hanging lockers. I keep the heavier tools in the forward locker

The first photo is a toolbox that I had built to keep all things organized. When Kimberlite was built, I had Amel add 2 shelves in both hanging lockers. I keep the heavier tools in the forward locker

Good morning, I started the generator this morning and discovered that it ran fine but was not putting AC power out. I tried both battery chargers, ac units and still nothing. Green AC light does not