On my 54 the poles are stored on deck. At the forward end there is the attachment as shown.

I have decided to get a second pole for my A55. Amel never offered double poles for the 55 but did for the 54. I would be very interested in seeing some pictures of how the poles were mounted on a 54

Hi Chris, Attached the block diagram for Multiplus install. I'm still in the process of finalising the electrical line diagram following the rewire of the NAV STN and N2K network - because the design

Hi all, Regarding the insulation lining at the top of the engine room, this is sagging quite a bit along the port side, basically the area under the port cockpit locker. I believe an easier, and more

Hey folks, our Dessalator 160 L Control Panel has decided to give up the ghost and thought I’d check to see if anyone here in the group might have a good source for replacement new or have an old pane

Has anyone removed this panel to add a holding tank or to access the Amel-installed holding tank? Please advise. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galvest

Good morning all returning to Mago del Sur after two month we discovered the rubbing strake damaged by a neighbouring boat. Is there a sectional drawing of the rubrail including the hull-deck joint av

Hello, Does anyone have a colour code for the brown gelcoat on the deck of a 1989 Sharki by any chance? Regards, Graham

Hi All, After noticing a slight crack in my mainsail traveller boom bracket I have had a few spares made up, I now want to send them for anodizing can anyone confirm the color used on the original bra

Hello all. I am installing a new B&G system and looking at putting in the autopilot. The original autopilot works fine, but this will provide me some redundancy. I am looking to see if anyone has pict

Hi, we have decided to end our journey in New Zealand. So Scooter is now on the market for 140 000 EUR. All details here https://www.sellingscooter.net/ Cheers, Tom

Dear, when hauling out and making new antfouling this year I would like to install the B&G Forwardscan-sensor connected to B&G Vulcan 9, which is my additional plotter for Navionics-map in the cockpit

Has anyone with LiFEPO4 batteries on board researched the need for specialized fire extinguishers for a battery fire? Best I can tell is that a class D extinguisher is not necessary as the batteries c

I'm having some equipment installed in Germany this summer. One supplier is indicating that he can deliver the equipment without charging VAT as my boat is under temporary importation in the EU. Anoth

Ok so here it is. I have been thinking about getting an Amel for quite a while and am about ready to make the leap, but with all things I over think everything. I love the boat, but the inmast furling

After years if being irritated by having to go onto the aft deck to adjust the mizzen traveller I finally got a solution that is simple and doesn't break the bank. And no holes in the deck and retains

Bonjour à tous et merci de l’acceptation dans le groupe... J’ai le plaisir de vous annoncer que depuis une semaine, me voila l’heureux propriétaire du Super maramu 2000 numéro 438 de 2004...Je n’en pr

Some of my floorboard hatch hinges are broken and need replacement. I’ve having some trouble sourcing exact replacements here but n the USA. Does anyone know either the original Mfg or a replacement c

Hello Group! I finally managed to change to an Austrian flag and rename my Super Maramu to "Sular". I'm not at the boat right now but I will be next week. I forgot to measure the size of the sticker a

Dear Amelians, after many years of dreaming following Your experience around the world, it’s my time to start a voyage following the trade winds. I’m planning to move in January 24 from Europe to Cari