Almost any Onan owner, HDI is a Preferred Vendor of Amel Owners Yacht School (Amel School). They were one of our first Preferred Vendors. They specialize in making cast stainless steel components to b

Is there an Amel hull loss database somewhere? I've been listening to some of the debate online about bolt-on vs integrated keels. What's missing seems to be a discussion of what actually sinks yachts

A54 and later model Amels, You may be aware of the recent fire and sinking of A54, SV Vagamonda. I believe that I know the origin of the fire because of some things I have seen on various A54's owned

Bill I think you sent this to the wrong person! Cheers Tim

Hi All, I am thrilled to post that I am now the proud owner/caretaker of S/V Joy (SM #388). Since she was built in 2002, she has been lovingly cared for by 4 previous owners under the names Joy, Bambo

The wind speed readout on my B&G 3000 system has not been working since we launched this season. I finally had an opportunity this morning to investigate. I confirmed the processor is working and the

Hi all, This morning my primary windlass motor refused to operate at full speed when retrieving the anchor. It operates, but runs rather slowly, even with no mechanical load to speak of its drawing ar

Hi folks, I’m having machine shop to make me a wrench for ruder nut out of aluminum. Picture attached. If you want I can give you his name and he can do it and ship to you. Also he recently did foil r

Hi everybody, has anybody an idea how to straighten the railing? Best regards, Martin

Hi all, for your interest. Following on from my blockage caused by a kinked pipe I decided, even though there was no blockage, after 14 years or so it was time to clean the circuit. I rigged a circula

Dear Amelians, We have stepped down our masts this winter to accomodate a full bottom job during indoor storage , During stepp down we marked the positions of the spreaders on the shrouds. However we

**Resending this information as it's more appropriate as a new topic** All, I own SM#23, 1990. I've learned a lot about the two different C-drives during my ownership. This knowledge comes from Amel,

I have a tiny pinhole leak in my Onan 11kw genset and am looking for a replacement elbow part # 155-3261-02. Quite frustrating as we barely use ours and flush with fresh water during periods of non-us

Almost 6 years since Nikimat (SM2K #289) was destroyed during Hurricane Irma in Sint Maarten. Less and less I read the forum questions, even less frequently I reply - as I am leaving the island, the t

The engine stop switch for my Perkins M60 does not work. Through trouble shooting I believe the problem is the Fuel Stop Controle Solenoid. In trying to buy a replacement Solenoid am asked if I want a

The following SMs are all the same SM. And, this is what the C-Drive and Propeller (shaft) look like on the above SMs: And someone looking to buy this SM was told by the owner that "Amel Super Maramus

Hi All, I am looking for a little help from you kind bunch of people, please. The items in question are the push button latches fitted to almost all the doors and drawers inside the interior of (at le

Can i make somebody happy with 2 perkins gaskets?

Good day Amelians, Recently, I had someone remove my electric bilge pump for repairs and it now works. My problem is the person who removed it won’t reinstall it. So i will have to do it myself. would

During the post in case of LiFePO and the needed power for the BT I got the understanding that it is a need to move the battery bank from the engine room to the bunk. I tried to see what other has don