Hello, after organising my spares I found 2 items that previous owner did not described. Any ideas what it is? Thank you in advance Jarek SY NOA BLUE SM 201

Hi we recently took over Revelation from Drew & Lili Gaffney. One of the things Drew was trying to do before selling the boat was to replace the standing rigging. He bought a full set of replacement r

HI, I just had the pleasure _ha_ of rebuilding the manual main furling gearbox. It is not difficult. The only hard part was getting the outer race out and the new one back in. Above please find a phot

The last 2 days I had the pleasure of rebuilding the manual furler for the mainsail. I would first like to thank Mother Ship Adrift for his video. It was very helpful. I saw in a later video that his

Hi All, Having some trouble finding a replacement for this B&G depth transducer (see photo). Does anyone have tips? Or maybe information on which transducer might also work on H2000 systen via B&G pro

Hello all, Most of the nuts used outside are of a type U (also called PIG NOSE - SNAKE EYE TWIN PIN - TWIN HOLE - TWO HOLE - TWO PIN -2PIN - 2 HOLE) I found some, unfortunately wrong sizes. I bought U

Hello to the group, while we had the last zoom meeting by the german www.trans-ocean.org we discussed and showed how to join the platform www.noforeignland.com to track ships and positions of our memb

https://panbo.com/2022-gps-rollovers-furuno-airmar-jrc-and-who-else/ seems to be a relatively widespread issue……

Dear amelians, I'm going to overhaul BT next month. Does anyone in the group have a silicone lip seal kit that can sell me? I have the boat in Spain and I exchanged some emails with the SSP manufactur

Hi all, The mechanic here in Licata on Sicily was until now not capable to get the gearbox and the motor from the boom. First he tried to push it upwards with a jack and later he tried to pull it usin

Good morning I have two reference units. One I did replace. But the alignment matches not with the rudderposition. When the alignment is ok than it’s like on the picture with reference units When the

hello all, I plan to install a SCUBA compressor to fill the tanks and it will run using my 5.5 kw genset. Looking for recommendations on makes and model from those that have them onboard.

To all Maramu' owners, Looking for the measurements of the side windows front and rear. I am preparing a refit and need to change that as they have cracks and even with tape on it it's leaking...on to

Happy new year to all and everyone! I have recently purchased an Amel Maramu 1981 and I am still trying to figure out what is what, what does what and what is original and what is not. I have a few qu

Hi José, Please advise your equipment details – for example, model number. And preferably advise also what, if any, software/firmware updates have been made since initial installation. Regarding your

Hello everybody, in the last issue of Professional Boat Builder (PBB, an online magazine that every sailor should read...), Nigel Calder (see attachment) gives his thoughts about Insurance and Lithium

Hello, After my previous treat on electronic brands I more or less have decided to go for an all B&G solution. Next question is what autopilot should I choose. Does anyone has experience with the B&G

Hi all, Our fridge evaporator seems to be partially and intermittently cold. And the compressor runs but stops after a while. It had happened recently that the fridge stopped cooling but after a stop