Heya! We've been sailing our 'new to us' Amel Santorin for two weeks now and had some really great experiences sailing the Med. What a great boat! Meanwhile we had some problems with our batteries los

Hello all- Does anyone have a source in the USA for Vetus coupling bushing set K018 ?

Has anyone found a suitable replacement for the Amel-installed Motorola Marine 9RC 8055 Shaft Alternator (24 volts)? CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Gal

Hi folks, did anyone troubleshoot Bamar Boxtron E14S? Last year it stopped working and found that it was one blown fuse (easy fix that time). Today I was bending sails and found out that Boxton is out

You don't have to look very hard in this forum for stories about the difficulty of pulling the C-drive side of the Vetus coupling. This is needed as part of the process to align the transmission with

Hello I have the attached schema from past threads, and would like to know if any of you also have the number of builds per model? Rgds, Claus

Hello, I forgot to measure the dimensions of the DC panel before leaving my boat. Does anyone have a hard measurements of the stock DC panel available? Thank you, Malcolm Sharki #89

Hello, everyone! I’m trying to disassemble the main furler gearbox/manual furler. I managed to take it of the mast and open the top cover, but I’m stuck getting the shaft out, it seems like the manual

Hi Everyone, As some of the rubber knobs that hold our portlights open have gotten shredded, I spent some time looking for a suitable substitute but found there was no drop-in replacement. So I decide

Hi Ruslan, et al, I routinely rig two preventers on the main, one to starboard, and one to port, and generally have these permanently rigged when underway, even when going upwind. Rationale: I once ha

Amel ketch fanboy here. Does anyone know of a good reference text for optimizing the sailing of ketches? I don't see much ketch information in general texts such as Thomas & Bruce's "Heavy Weather Sai

Dear Amelians With the prohibitive cost of marinas in Turkey, someone suggests an alternative safe and reasonable cost marina on nearby greek islands to leave the boat unattended for 1 month middle jo

Hello Amelians We are thinking about placing our SHARONA for a year in Kalamata Greece. Did anyone stay in Kalamata, I would be very thankful to get any feedback about the marina, area, weather condit

hi folks, Could you please share what steps do you do when furling in/out main sail? I read on the forum that one have to be on starboard tack to furl, but that is not very practical for multiple reas

Recalling that, for our most recent 4-year / 1,000HR service of the Yanmar 4JH3-HTE, both the oil cooler and the turbo intercooler needed refurbishment The oil cooler, because this seems to be a stand

Hope this is the right place. I’m replacing the cockpit cover with a new one. I’m going to throw the old one away…Anyone in Norther Germany want it? I have some other give always.

I'm planning to do the ARC later this year and am going through the list of safety equipment required. One item I don't have on my boat - and I don't think any of the other types of Amels have or had

I have a water leak from the pipework below the Isotherm. It is originating where the vertical pipe enters the "ferrule" that attaches to the metal fitting. I have never worked with these types of pip

Dear Amelians, last year we decided to upgrade to Lithium batteries and now it is time to share some of the results, maybe it is of some value for you if you have similar plans. Our design criteria: ·

Hello, I just got my Jordan Drouge (www.jordanseriesdrogue.com) for my SN. It’s quite a massive pice by just looking at the shackles. Did anyone make up it’s mind about where to attach it? The clamps