|
sticky
How to do almost anything
#Wiki
All Group Members and Moderators, We have added a Amel Yacht Owners Group Wiki which can hopefully answer any of your questions regarding how to use the new group and its tools. When you are online at
All Group Members and Moderators, We have added a Amel Yacht Owners Group Wiki which can hopefully answer any of your questions regarding how to use the new group and its tools. When you are online at https://amelyachtowners.groups.io/g/main you will notice "Wiki" in the left column at the bottom. Click on Wiki to discover what you can do. The Wiki also includes a section for Moderators. Most of the content in this Wiki was provided by group.io, our host. I hope this helps you. -- Best, Bill Rouse Yacht School 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 My Calendar
By
CW Bill Rouse
·
|
|
Group order - Arch from Emek Marin 7 messages
Hello everyone, I intend to install an arch on my SM. I checked for options and it appears that the arch made by Emek Marin in Turkey is a good choice, strong and reliable. I recall that ca. 50 SM's h
Hello everyone, I intend to install an arch on my SM. I checked for options and it appears that the arch made by Emek Marin in Turkey is a good choice, strong and reliable. I recall that ca. 50 SM's h
|
By
Philippe Chatton
·
|
|
Fixed vs. Folding Prop 9 messages
Hi, I would be interested in your opinion on the following. I have a SN with the standard fixed propmfor the shaft gen. However the ideling prop goes on my nerves when sailing. Sailinf should be quite
Hi, I would be interested in your opinion on the following. I have a SN with the standard fixed propmfor the shaft gen. However the ideling prop goes on my nerves when sailing. Sailinf should be quite
|
By
Bernd Spanner
·
|
|
Atlantic Tower Install - Port Fixing 15 messages
Hi all, I have recently purchased an Atlantic Towers - tower in a box for Grand Cru. The install looks fairly simple except for one area - the port side where the propane gas locker is fitted in the r
Hi all, I have recently purchased an Atlantic Towers - tower in a box for Grand Cru. The install looks fairly simple except for one area - the port side where the propane gas locker is fitted in the r
|
By
Tony Elliott
·
|
|
BOW THRUSTER .Replacement cover does not align 7 messages
I am currently replacing the damaged gears of the bow thruster (broken bearing), using the original Amel kit (incidentally, out of stock at my normal suppliers, Amel Hyères– had to apply directly to l
I am currently replacing the damaged gears of the bow thruster (broken bearing), using the original Amel kit (incidentally, out of stock at my normal suppliers, Amel Hyères– had to apply directly to l
|
By
PAOLO CUNEO
·
|
|
Wind instruments connected to front lighting circuit! 8 messages
Hi, Please see attached word document. This one seems really odd to me. Maybe, this is the way it's done! Hopefully, someone can explain what is going on and point me towards a solution. Regards, Chri
Hi, Please see attached word document. This one seems really odd to me. Maybe, this is the way it's done! Hopefully, someone can explain what is going on and point me towards a solution. Regards, Chri
|
By
Chris Paul
·
|
|
B&G instrument covers and new ultrasonic speed sensors? 4 messages
Hi everyone: I am looking for replacement instrument covers for my 4 B&G analog displays. Mine are beginning to fall apart. Maybe someone out there has a few that they are willing to part with for the
Hi everyone: I am looking for replacement instrument covers for my 4 B&G analog displays. Mine are beginning to fall apart. Maybe someone out there has a few that they are willing to part with for the
|
By
Stu and Lana Holmes
·
|
|
Mosquito Nets 6 messages
Hello All I'm interested to know what fellow SM owners do to keep mosquitoes out, especially at night? Are there standard screens that can be bought for all the hatches? Do you place a net over the co
Hello All I'm interested to know what fellow SM owners do to keep mosquitoes out, especially at night? Are there standard screens that can be bought for all the hatches? Do you place a net over the co
|
By
Rachael
·
|
|
Turkey: Update on Gray Water and Black Water Disposal Requirements 8 messages
Dear Ameliens, An important request to all those who are currently and already this year cruising in Turkey between Bodrum and Kas. Especially in the Aegean, Göcek, Marmaris, (Gulf of) Fethiye with it
Dear Ameliens, An important request to all those who are currently and already this year cruising in Turkey between Bodrum and Kas. Especially in the Aegean, Göcek, Marmaris, (Gulf of) Fethiye with it
|
By
Ulrich Michael Dangelmeyer
·
|
|
Replacement of Depth Transducer 2 messages
Hi, My depth meter shows zero and it seems the sensor is defective. Does anyone have experience with replacing the original B&G depth transducer? According to the technical descriptions on board, the
Hi, My depth meter shows zero and it seems the sensor is defective. Does anyone have experience with replacing the original B&G depth transducer? According to the technical descriptions on board, the
|
By
Roland Mueller
·
|
|
Replacement for JABSCO toilet wall switches SM2000 3 messages
Hey folks has anyone identified a good replacement for the JABSCO toilet wall switches? Both of ours are cracked, beaten up, and have seen better days. Looked around online a bit, didn't see anything
Hey folks has anyone identified a good replacement for the JABSCO toilet wall switches? Both of ours are cracked, beaten up, and have seen better days. Looked around online a bit, didn't see anything
|
By
Rick Stanley
·
|
|
Keel rust and grounding 4 messages
Hi everyone, Based on past posts, it looks like rust on the keel of an Amel is not something unheard of. My concern however is that, unlike what my surveyor told me, the grounding cable that is connec
Hi everyone, Based on past posts, it looks like rust on the keel of an Amel is not something unheard of. My concern however is that, unlike what my surveyor told me, the grounding cable that is connec
|
By
Ben Levy
·
|
|
Steering cables 3 messages
Hi everyone, Can anyone explain to me how to tighten the steering cables in my maramu? I understand that the metal flaps need to be lifted in order for the nuts to be able to turn but what then? What
Hi everyone, Can anyone explain to me how to tighten the steering cables in my maramu? I understand that the metal flaps need to be lifted in order for the nuts to be able to turn but what then? What
|
By
Ben Levy
·
|
|
Start of fire from old Grundig TV in saloon 5 messages
Hello Amelians, Feels like we nearly lost our SM to a fire yesterday, due to a short circuit in an old style Grundig TV which was in a starboard compartment in the saloon. This TV, which probably is t
Hello Amelians, Feels like we nearly lost our SM to a fire yesterday, due to a short circuit in an old style Grundig TV which was in a starboard compartment in the saloon. This TV, which probably is t
|
By
Stephen Nicholson
·
|
|
Furler solenoid wiring from switch-solved
Just to let you know, Amel designed the original solenoid tandem to wire in paralale maybe more redundancy or less load. However one 2 way solenoid with 4 heads + 2xswitch can do tge same. Now next pr
Just to let you know, Amel designed the original solenoid tandem to wire in paralale maybe more redundancy or less load. However one 2 way solenoid with 4 heads + 2xswitch can do tge same. Now next pr
|
By
Ben "Santorin LO"
·
|
|
[Amel Yacht Owners] Re: Bilge maintenance 13 messages
Hi all, reviewing this past thread on bilge maintenance. I am wondering if anyone has tried one of the enzymatic drain maintenance products? https://www.amazon.com/ECOS-Earth-Enzymes-Drain-Maintainer/
Hi all, reviewing this past thread on bilge maintenance. I am wondering if anyone has tried one of the enzymatic drain maintenance products? https://www.amazon.com/ECOS-Earth-Enzymes-Drain-Maintainer/
|
By
Dan Carlson
·
|
|
Anchor wash pump 12 messages
Hi, We have to replace our anchor wash pump. Unfortunately, there is no specification readable anymore. Does anyone know the specifications of the anchor wash pump? Regards, Roland SM 150 Aventura Gen
Hi, We have to replace our anchor wash pump. Unfortunately, there is no specification readable anymore. Does anyone know the specifications of the anchor wash pump? Regards, Roland SM 150 Aventura Gen
|
By
Roland Mueller
·
|
|
Whisker Poles needing work 4 messages
Today, whilst rigging the poles the connector popped right off out of the pole. Lucky me to have thus happen with no harm or foul. Upon quick inspection it appears the rivets have corroded and broke-
Today, whilst rigging the poles the connector popped right off out of the pole. Lucky me to have thus happen with no harm or foul. Upon quick inspection it appears the rivets have corroded and broke-
|
By
Chris Doucette
·
|
|
𝗡𝗢𝗪 𝗛𝗘𝗔𝗥 𝗧𝗛𝗜𝗦 4 messages
I have negotiated a significant discount for Amel owners who are current PredictWind clients and those that want to be a client of PredictWind. I will post the details to the group within a few days.
I have negotiated a significant discount for Amel owners who are current PredictWind clients and those that want to be a client of PredictWind. I will post the details to the group within a few days.
|
By
CW Bill Rouse
·
|
|
Amel 54 with VW engine
Denis, Aarts dieseltechniek bv. In Holland. He is a representative of VW marine engines. You can order parts from him. Look him up on the web
Denis, Aarts dieseltechniek bv. In Holland. He is a representative of VW marine engines. You can order parts from him. Look him up on the web
|
By
ofer magen
·
|