main@AmelYachtOwners.groups.io

How to do almost anything #Wiki

All Group Members and Moderators, We have added a Amel Yacht Owners Group Wiki which can hopefully answer any of your questions regarding how to use the new group and its tools. When you are online at

All Group Members and Moderators, We have added a Amel Yacht Owners Group Wiki which can hopefully answer any of your questions regarding how to use the new group and its tools. When you are online at https://amelyachtowners.groups.io/g/main you will notice "Wiki" in the left column at the bottom. Click on Wiki to discover what you can do. The Wiki also includes a section for Moderators. Most of the content in this Wiki was provided by group.io, our host. I hope this helps you. -- Best, Bill Rouse Yacht School 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 My Calendar

By CW Bill Rouse ·

ZOOM Meeting Technical Questions: 3 #ZOOM

For those planning to attend the ZOOM meeting, please post questions to the Topic " ZOOM meeting technical questions" by replying to this email. Tilo Peters will likely respond to these technical ques

For those planning to attend the ZOOM meeting, please post questions to the Topic " ZOOM meeting technical questions" by replying to this email. Tilo Peters will likely respond to these technical questions. -- Best, CW Bill Rouse Amel Owners Yacht School ( http://amelownersyachtschool.com/ ) 720 Winnie St Galveston Island, TX 77550 +1(832) 380-4970 My Calendar ( https://preparetocastoff.blogspot.com/p/calendar.html )

By CW Bill Rouse ·

Keel rust and ballast straps on a Maramu 14

OK, I have read every thread about keel rust and copper ballast straps, and I have several questions. 1. If the copper strap is intact, then is it true that there would be no rusting of the ballast? 2

By Jacob Champness ·

Onan does not start 16

My Onan is totally dead nothing happened when trying to star not a slightest click. I have measured 12,8 volt between +on the starter and minus on the alternator, but only about 4 volt between + on th

By Paul Osterberg ·

alternator wiring question 3

Hello fello Amelians I've been replacing the bilge bonding strap on our Maramu #162 The job has offered a jolly time well spent sprawled across my engine. Whilst relaxing in this position i _think_ i

By smiles bernard ·

Cleaning Water Heater 11

Hi all, I just opened my water heater to check the zinc. It's been a few years since I've done this. I found the zinc mostly intact, but covered with a greenish film. The water is a little discolored

By karkauai ·

Mango Headsail Question 5

Hello all. I have a 1985 Mango and looking at flying dual headsails for downwind running. I have figured out the Amel poles and wanted to know if there was originally a mouse that runs up the foil whe

By Arlo ·

Amel decal 10

I need to replace the Amel logo stickers does any one have a J peg file I can send to a vinyl shop to get cut? Thanks.

By Rob Hughes ·

Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use) 63

A little over a year ago, I replaced my nearly stock Amel 54 “comfort package” lead acid system with a nearly complete LifePo4, aka lithium battery system. The system was designed with the help of Vic

By Scott SV Tengah ·

SM Anodes especification 10 #replacement

Hi Amelians, It's my first time to change the anodes in my SM. I couldn't find the specification on Amel manual. Any suggestion? -- Jose Prieto SV Wayag, SM 323 Currently Alicante, Spain

By JOSE PRIETO ·

SM Outhaul troubleshooting 3

Hi all, on our last passage I popped the breaker on the mainsail Outhaul a couple times. I disconnected the motor from the Outhaul and was able to reset the breaker and actuate the motor, but the when

By Dan Carlson ·

Hi- I made it to St Maarten. 2

We will haul Wednesday for an out of water survey. Then back to Island Water World marina for provisions etc. I hope to leave Thursday 2 PM bridge for St Thomas to pick up my crew Then straight back t

By eric freedman ·

Genoa Swivel - position + binding connection to the genoa top loop - Amel 54 12

Dear Ameliens, I got a new front furler and have to hoist the genoa again. When I prepaired the genoa loops I got the feeling that the Swivel respectively the lower part is in the wrong position. At l

By Stefan Schaufert ·

Bonding Strap 7

I would like to purchase a copper strap to replace the original bonding strap. I looked in the files but could not find the original size used by Amel. Could someone provide me the width ,thickness an

By Patrick McAneny ·

IALA buoy system warning 9

Hello, Warning according to an incident yesterday in le Marin, Martinique. We observed an AMEL super maramu full sail up entering the bay. The captain left a green buoy at his starboard side and ended

By Oliver Henrichsen, SV Vela Nautica ·

Dessalator DUO 100 - Watermaker HP hose/pipe

Hello Thanks for your responses. We managed to source an equivalent of the pipe locally. The one sold and installed by dessalator is made by zec. Full specs below www.zecspa.com Best Soraya

By Sv Garulfo ·

Upcoming Event: ZOOM Meeting Marine Insurance presentation Questions & Answers - Sat, 06/06/2020 20:00-21:00, Please RSVP #cal-reminder

Reminder: ZOOM Meeting Marine Insurance presentation Questions & Answers When: Saturday, 6 June 2020, 20:00 to 21:00, (GMT+00:00) UTC An RSVP is requested. Click here to RSVP Description: I asked Gary

By main@AmelYachtOwners.groups.io Calendar ·

Amel Euros 41 anyone?

We would love to connect with others that have the same boat as us.

By Rachel & Andy ·

Two questions 4

Hello Gang, Our Eleuthera is powered by a Volvo TMD22. Our rotary start switch on the optional Engine start panel is not functioning correctly. Anybody know where I can procure a replacement? Second q

By Germain Jean-Pierre ·

Standing rigging - France 12

We are now the very proud new owners of Nunky which is SM110 from 1993. Despite her age Nunky is in incredible condition due to the care her former owner lavished on her. As an example, he would only

By Mark Barter ·